How To: Get Username from UID & Vice Versa in Linux

Question:

I have an UID, how do I get the username belongs to this UID in Linux?

How to Get UID from USERNAME in Linux

We usually know, there is a dedicated command called ‘id’ in linux given to find UID from username is called ‘id‘

You can use that to get the UID from the username in linux:

# id -u root
0

How to get Username from UID in Linux

Although, there is no built in command get fetch the username from the UID. We can use a pipe and regular expression match on getent to do that.

getent is a unix command that helps a user get entries in a number of important text files called databases. This includes the passwd and group databases which store user information – hence getent is a common way to look up user details on Unix.

You can use the following command to find username of the UID 752 for example in a system:

# getent passwd "752"|cut -d: -f1
texstard

getent can take group database too, although, we have used passwd database as that contains the UID of the respective linux user.

Troubleshooting: Imunify360 database is corrupt. Application cannot run with corrupt database

Error Message:

# service imunify360 start
Starting imunify360: WARNING [+ 3743ms] defence360agent.utils.check_db|DatabaseError detected: database disk image is malformed
WARNING [+ 3766ms] defence360agent.cli.subparsers.common.server|Imunify360 database is corrupt. Application cannot run with corrupt database. Please, contact Imunify360 support team at https://cloudlinux.zendesk.com

Detail Information & Explanation:

If you are using imunify360, an application firewall for linux servers by Cloudlinux team, you might incur an error where it says the database is corrupt. You might first see ‘Imunify360 is not started’ error from the WHM panel and end up getting the above error message as stated. Imunify360 uses a SQL database, located under ‘/var/imunify360/imunify360.db’. This image is checked everytime Imunfi360 tries to start, and if the database is malformed, it would not start. Fortunately, imunify360 comes with tools to handle this database and recover if corrupted.

How to Fix:

First, we start by running database integrity check. This can be done using the following:

imunfiy360-agent checkdb

(From Imunify360 Doc: checkdb  – Check database integrity)

Once done, you can now use ‘migratedb’ to repair and restore if the database is corrupted.

imunify360-agent migratedb

(From Imunify360 Doc: migratedb – Check and repair database if it is corrupted.)

If migratedb fails, the only way to recover this is to reinstall imunify360.

Linux How To: Install IPTABLES in CentOS 7 / RHEL 7 Replacing FirewallD

CentOS 7 / RHEL 7 doesn’t come with iptables by default. It uses a full functional firewall system called ‘firewalld’. I have been a big fan of iptables and it’s capability from the very first, and since I have switched to CentOS 7, I couldn’t stop using it. I had to stop firewalld and install iptables in all of my CentOS 7 installation and start using iptables rules as I was using before. Here is a small How To guide on installing Iptables and disabling firewalld from a CentOS 7 or RHEL 7 or a similar variant distro.

How to Install IPTABLES in CentOS 7

To begin using iptables, you need to download and install iptables-service package from the repo. It isn’t installed automatically on CentOS 7. To do that, run the following command:

# yum install iptables-services -y

How to stop the firewalld service and start the Iptables service

Once the iptables-serivces package is installed, you can now stop the firewalld and start the iptables. Keeping both kind of network filtering too can create conflicts and it is recommended to use any out of two. To do that run the following:

# systemctl stop firewalld
# systemctl start iptables

Now to disable firewalld from the starting after the boot, you need to disable the firewalld:

# systemctl disable firewalld

To disallow starting firewalld manually as well, you can mask it:

# systemctl mask firewalld

Now you can enable iptables to start at the boot time by enabling iptables using systemctl command:

# systemctl enable iptables

How to check status of iptables in centOS 7

In previous distros, iptables status could be fetched using service command, although, the option is no longer available in CentOS 7. To fetch the iptables status, use the following:

# iptables -S

Iptables save command can still be used using service tool:

# service iptables save

This would save your iptables rules to /etc/sysconfig/iptables as it used to do in previous distros.

Linux: Assertion failed on job for iptables.service.

If you are using Centos 7 or RHEL 7 or any of it’s variant, you are probably using ‘Firewalld’ by default. Although, if you are a iptables fan like me, who likes it’s simplicity and manipulative nature instead of a full form firewall, then you probably have disabled firewalld from your CentOS 7 instance and using iptables. There are couple of servers, where I use runtime iptables rules for postrouting and masquerading. These rules are dynamically generated by my scripts instead of the sysconfig file under:

/etc/sysconfig/iptables

This file is generated upon running the iptables save command:

service iptables save

which I rarely do so.

Error Details

Which is why, I don’t have a /etc/sysconfig/iptables file in those servers and a common error I see while restarting iptables in those system is the following:

# systemctl restart iptables.service
Assertion failed on job for iptables.service.

How to Fix The Error

The error appears because you don’t have any rule in /etc/sysconfig/iptables or the file doesn’t exist either. You can ignore the error as iptables would still run. To eradicate the error, simply make sure you have some iptables rules loaded on your system using the status command:

iptables -S

And then, run:

service iptables save

Once done, restarting iptables shouldn’t show the error any longer.

Quick Tip: How to view public IP using SSH terminal/cURL/wget

There are times when you might require to view the IP address your server is using for outgoing connections. If you are in command line/console/mosh/ssh/rsh, you want an one command solution instead of visiting a page like whatismyip.com using lynx browser or so on. Here is a quick tip that I regularly use to perform this:

Using cURL:

curl ifconfig.co

Using wget:

wget -qO- ifconfig.co

ifconfig.co does it simple and easy.

SMTP Error: 550 Please turn on SMTP Authentication in your mail client – IP is not permitted to relay through this server without authentication

We had a customer complaining about a commonly seen error of the following type:

550 Please turn on SMTP Authentication in your mail client. mail-pf0-f172.google.com [209.85.192.172]:38632 is not permitted to relay through this server without authentication.

Diagnostic-Code: smtp; 550-Please turn on SMTP Authentication in your mail client. 550-mail-pf0-f172.google.com [209.85.192.172]:38632 is not permitted to relay 550 through this server without authentication.

reason: 550-Please turn on SMTP Authentication in your mail client.
550-mout.kundenserver.de [212.227.17.24]:49392 is not permitted to relay
550 through this server without authentication.

They were all basically the same error. This is a common error and the solution is pretty simple as it looks like. Enabling ‘SMTP Authentication’ on the outlook or the mail client should solve the problem. But interestingly, the client was smart and he wasn’t doing any mistake with ‘SMTP authentication’. The error was actually showing up when someone was trying to send the mail to him (As a receiver SMTP). We then tried digging the error further.

There is something we need to remember. SMTP is not only authenticated using username and password, it also goes through a dns authentication check too. If your dkim/domainkeys/spf/dmarc do not match as the mail server has advised, the mail will get denied with the same type of error (Error code 550). We then realized the customer account was transfered earlier from a different server and the old domainkeys were still there in it’s DNS zone file. As domainkeys are RSA keys generated per server, it is important to regenerate the keys after the server change. Otherwise, the old key check through the DNS can trigger the 550 error from the receiver relay. We had deleted and generated a new domainkeys for the customer and the error went off.

phpMyAdmin Coming Blank in Cpanel

One of the customer reported an issue related to phpMyAdmin earlier today. He was getting a blank page of phpmyadmin that only says “Welcome to phpMyAdmin”

Once I hoped into the ssh and checked the cpanel error log file located under

/usr/local/cpanel/logs/error_log

I observed the following error:

PHP Fatal error: require_once(): Failed opening required './libraries/display_select_lang.lib.php' (include_path='/usr/local/cpanel/3rdparty/php/56/lib/php:.') in /usr/local/cpanel/base/3rdparty/phpMyAdmin/libraries/plugins/auth/AuthenticationCpanel.php on line 147

The error was peculiar because display_select_lang.lib.php wasn’t available in any other cpanel phpmyadmin source files I searched. Then I realized “AuthenticationCpanel.php” mentions the error which usually because Cpanel Authentication wasn’t done properly with the MySQL. Cpanel pass wasn’t synced with the MySQL.

Going to WHM >> Password Modification >> If you select the user and WHM shows you the ‘Sync with MySQL Password’ option, that means the MySQL password is outdated to cpanel and requires syncing (NB: If the password doesn’t require syncing, this option won’t be there). You can reset the pass and check the option to Sync the new pass with MySQL. That should restore your phpmyadmin.

Linux: Disable On-Access Scanning on Sophos AV

We use Sophos AV instead of ClamAV in couple of our linux servers. Sophos comes with on access scanning that uses a kernel module to trigger which file has been accessed unlike ClamAV which only come with signature and a basic scanning tool by default. It has it’s own benefit while drawbacks too. You have to give a certain amount of resources for Sophos. There are times, when you may require to disable the On Access Scanning on Sophos AV to diagnose different issues with the server.

To disable on access scanning on sophos AV, run the following from your terminal/ssh console:

/opt/sophos-av/bin/savdctl disable

To re-enable on access scanning on sophos AV, run the following:

/opt/sophos-av/bin/savdctl enable

Sophos log file is located here:

/opt/sophos-av/log

Sophos comes with multiple control binaries. They can be found at the following directory:

/opt/sophos-av/bin

You can find sophos binaries available at the man page too:

man savdctl

How to: Setup a server for R1Soft CDP backup?

We at Mellowhost has been utilizing R1Soft CDP backup for last 8 years. R1Soft has been a great backup tool even though the tool is immensely resource hoggy. At different times we had gone through different situations to handle our backup servers efficiently. After all the hiccups with backup nodes, we ended up efficiently configuring 3 backup servers of 3 different configuration

  1. backup1 = It contains 12TB file system on a RAID 0 array. It copies data to a BTRFS compressed drive once a week to keep the data safe if RAID 0 dies. This server uses RAID 0 for faster drive verification and block scanning by r1soft. This server hosts servers that requires frequent backing up and can sustain a loss of a week data (Less important data). As the server performs really fast due to being RAID 0, we can run multiple r1soft threads at a time including disk safe verification and block scans.
  2. backup2 = It contains 30TB file system in RAID 6 hardware array. This is used for hosting our VPS backups. This server is a seriously large one to keep backups of our enterprise VPS clients.
  3. backup3 = It contains 16TB file system in RAID 10 hardware array. This server is hosted in a East Coast American Location. It is our off network backup server and keeps backups for East Coast servers too.

One of the key factor in designing a backup server is the size and the location. Need to keep in mind that CDP 3 takes more space than CDP 2 for unknown reason while still being a differential backup solution, not just an incremental. Location of the server matters due to the network speed. If you are hosting your server a lot far than the server network, it may take longer time to complete the initial storage. Due to the latency it may fails to perform as fast like 1Gbps even if both network supports it. Just for an example, if you are backing up your data at 1MBps speed, it would take 12.13 days to complete backup of 1TB data [ Calculation: (((1024 x 1024) / 60) / 60) / 24 = 12.13 days ]. A 100Mbps port can give you speed upto 10MBps, while you can have 50MBps+ speed if you are using a 1Gbps network roughly. So why does the speed matter? If you are backing up your initial data in 13 days, that doesn’t mean it will be the same all the time. Your second backup would take much less amount of time as it only needs to upload the differential backups. That is true! But the problem will come when you require to do a bare metal restore. If your server requires a disaster recovery, you would then need 13 days to restore your server to the original state. Your customers won’t sit down for 13 days! While creating backup, it is important to think about disaster recovery too. How fast are you going to be able to restore the backup is an important concern while designing your disaster recovery solution.

I always recommend users to choose a 1Gbps network with a latency below 2ms if you want to have a good disaster recovery solution. This can guarantee a faster bare metal restore when needed.

The second key factor while creating the R1soft backup server would be to choose the RAID. If you are thinking to create r1soft backup on a non-raided solution, I think you should drop off your idea. RAID isn’t necessarily always use to keep your data safe, it can also be used for performance. Keeping a RAID 0 or striping in general is must for a R1Soft server. Otherwise, every couple of times, you are going to see a lot of stalled processes doing ‘disk safe verification’ ‘block scan’ etc etc and not able to keep the backup up to date or canceling processes due to duplicate backup process (Old one taking too long to complete). It is better not to choose RAID 5. I particularly didn’t try RAID 5, but I have used RAID – Z on ZFS file system, which was seriously slow for my work around. I switched the server later on to RAID 0 and BTRFS compression to keep a weekly backup which tremendously improved the R1Soft performance. We at later time, worked to create more backup servers with hardware RAID WB cache and battery backed unit to give us more performance benefit while creating and restoring backups. These servers have been performing tremendously well with R1Soft. They can also be called good disaster recovery node.

Last, I recommend you to understand that backup isn’t just keeping a copy of your data of your online existence. It is important to design a disaster recovery solution instead of just creating backups. If you are simply into creating backups, you probably don’t need R1Soft or any high end servers instead simple Rsync would work fine. But to create ‘Disaster Recovery’ solution, you need high level planning, good hardwares and good cost estimation. If you are leaving behind in any, you will probably fail to create a good disaster recovery solution that actually ‘works’.

How to: Find dm number of a LVM logical volume

Sometimes, you will see the error thrown in dmesg or /var/log/messages are mentioned in dm-number format, while you manage the disk using lvm logical volume name. This is because lvm logical volumes are designed through kernel device mapper technique and kernel recognizes volumes using dm numbers. There is a tool to list all the device mappers used for block devices under Linux. Simply type the following to list the maps:

# lsblk

It shall show something like the following:

There you can see the dm number for each lvm volume is listed under first bracket. For example the swap in this server is created with LVM with the name vg_iof442/swap and has the dm-1 mapping.