Tag: fsck

Can you run fsck on a disk image or raw file?

Question: Can you run fsck on a disk image or raw file?

Answer: I believe you are referring to KVM disk image/raw files. It could be the disk image created from a dd clone. The answer yes, you can run fsck on a disk image. You can also use other fsck attribute as required as following:

fsck.ext4 -fyC /somefile.raw

Remember to use specific partition fsck binary, here, we have used ext4 binary for a ext4 file system loaded on the image file. Running badblock program on an image file can be bad. You may use -c (small c) to run badblock check with the fsck:

fsck.ext4 -C -fyc /somefile.raw

This sometimes create undesired results and not advisable.

Question: What other option do I have?

Answer: You can mount the image using loop back device and then run the file system check. This can be done using kpartx as described in this post: How to: Mount raw VM disk images (KVM/Xen/VMW)

Check File System for Errors with Status/Progress Bar

File system check can be tedious sometimes. User may want to check the progress of the fsck, which is not enabled by default. To do that, add -C (capital C) with the fsck command.

fsck -C /dev/sda1

The original argument is:

fsck -C0 /dev/sda1

Although, it would work without number if you put the -C in front of other arguments, like -f (forcing the file system check) -y (yes to auto repair). A usable fsck command could be the following:

fsck -fy -C0 /dev/sda1

or

fsck -C -fy /dev/sda1

Please note, -c (small C) would result a read only test. This test will try to read all the blocks in the disk and see if it is able to read them or not. It is done through a program called ‘badblock’. If you are running badblock test on a large system, be ready to spend a large amount of time for that.